Position the helmet
Set the helmet over the outlets with its opening facing the airflow. Keep the vents clear. This setup works with compatible motorcycle, cycling, ski and padded MTB helmets. Gloves and boots require suitable attachments.
Dry a damp helmet with controlled warm airflow and a 60, 120 or 180-minute timer. This model uses 110–120 V, 60 Hz, with a US plug.
This is the U.S. voltage version. Check the rated voltage and plug before ordering.
View specifications and box contents
Place the helmet over the two air outlets so warm air can reach the padding. The dryer controls the temperature at approximately 48°C (±2°C) and operates at about 35 dB(A).
Set the helmet over the outlets with its opening facing the airflow. Keep the vents clear. This setup works with compatible motorcycle, cycling, ski and padded MTB helmets. Gloves and boots require suitable attachments.
Select 60, 120 or 180 minutes. The default is 60 minutes. Use Freshness Mode for routine odour care between washes and avoid looking directly at the UV source.
In an internal test at 22–26°C and 40–60% humidity, a sweaty-damp full-face liner felt dry to the touch after about 20–40 minutes. Thicker or wetter padding can take longer.
110–120 V, 60 Hz, with a US plug.
PRODUCT INFORMATION
For motorcycle, cycling, ski and padded MTB helmets. Position the helmet so air can pass through the lining. Gloves and boots need suitable attachments.
Dry a damp helmet with controlled warm airflow and a 60, 120 or 180-minute timer. This model uses 110–120 V, 60 Hz, with a US plug.
In an internal test at 22–26°C and 40–60% humidity, a sweaty-damp full-face helmet lining felt dry to the touch in about 20–40 minutes. Drying time varies with padding, moisture and room conditions. Use Freshness Mode for odour care between washes; it does not sterilise gear. Do not look directly at the UV source.
Place the helmet over the air outlets without blocking ventilation. Choose a timer, then check the lining before wearing. Gloves and boots need suitable attachments. Follow the care instructions for your gear and continue to wash removable liners as needed.
Suitable attachments are required for gloves and boots. Check the package contents above for the items supplied with this model.
Check the power rating and plug for your region before ordering. Leave the air inlets and outlets unobstructed and check the lining before putting the helmet back on.
REVIEWS