OPlace Smart Helmet & Gear Dryer (Pro Edition)

Keep Your Gear Fresh, Dry, and Ready to Ride.

Designed for daily commuters and urban riders, the OPlace™ Smart Dryer is built to support routine gear maintenance. Whether it’s post-ride moisture or unexpected rain, the central dual-duct airflow system helps dry helmet interiors efficiently while operating within a controlled temperature range.

Why Riders Choose OPlace:

• Central Dual-Duct Design (Fast & Even Drying): A dual-duct airflow design is intended to distribute airflow more evenly, helping to minimize localized heat concentration. OPlace™ features a centered, dual-outlet design to circulate warm air throughout the helmet cavity and support more uniform drying.

  Note: Drying performance varies based on helmet construction, liner thickness, and ambient humidity.

• Controlled Temperature Cap (≤ 48°C): The dryer uses temperature control and is capped at approximately 48°C (118°F) (±2°C) to support material compatibility during drying.

• Odor Management Mode: The built-in Freshness Mode (UV & Negative Ion function) is designed to assist with odor management during routine maintenance between washes.

• Low-Noise Operation: Operating at approximately ~35 dB(A), it is designed for use in typical indoor environments such as bedrooms or offices.

• Versatile Compatibility: Suitable for many full-face motorcycle helmets, cycling helmets, ski gear, and padded MTB helmets. Includes adapters for gloves and boots.

Efficient Workflow:

• Daily Commutes: Under typical indoor conditions (22–26°C, 40–60% humidity), many standard commuter helmet liners may feel dry to the touch within approximately 20–40 minutes.

• Deep Drying: Use the 60, 120, or 180-minute presets for wetter gear or thicker padding, depending on conditions and preference.

OPlace™ Lab Data: Performance Testing The following internal test example is provided for reference:

• Test Environment: 22–26°C room temperature, 40–60% humidity.

• Scenario: Full-face commuter helmet with a “sweaty-damp” liner condition.

• Result (typical): The liner may reach a “dry-to-touch” state within approximately 20–40 minutes.

• Note: Drying time varies based on material thickness, liner saturation, airflow path, and ambient humidity. The unit defaults to a 60-minute cycle, and you can manually stop it at any time.

Technical Specifications

• Model: OPlace Smart Gear Dryer

• Airflow System: Central Dual-Duct Forced Convection

• Max Temperature: Capped at 48°C (±2°C)

• Timer Presets: 60 min (Default) / 120 min / 180 min

• Noise Level: ~35 dB(A)

• Power Input: AC 110–120V, 60Hz (US Standard)

• Cord / Plug: Standard US plug

What’s Included

• 1 x OPlace™ Main Dryer Unit

• 1 x User Manual

⚠️ Important Usage & Safety Notes

• Not a Medical Device: The Freshness Mode (UV/Ion) is designed solely for odor management and routine gear maintenance. This product is not intended to sterilize gear, kill viruses, or prevent disease.

• UV Safety: Do not stare directly at the UV light source. The feature is intended for internal chamber operation only.

• Care Instruction: This device supports maintenance but does not replace the need for periodic washing of helmet liners.

Airflow: Central dual-duct forced convection
Temperature: Capped at approximately 48°C (±2°C)
Timer: 60 / 120 / 180 minutes
Noise: Approximately 35 dB(A)
Power: AC 110–120V, 60Hz, U.S. plug

Designed for many motorcycle, cycling, ski and padded MTB helmets, plus compatible gloves and boots when suitable attachments are used. Product shape, liner construction and ventilation vary, so contact support before ordering for an unusual setup.

1 × OPlace Smart Helmet & Gear Dryer main unit
1 × User manual

Included parts follow the selected product option and the product images shown for that option.

Freshness Mode is intended for odor management and routine gear care. It is not a medical sterilization function and does not replace periodic liner washing. Do not stare directly at the UV light source and keep ventilation openings clear during use.

The main unit includes a 24-month limited warranty. Battery and charging components are covered for 12 months, and accessories or non-electronic parts for 6 months. Mandatory consumer rights remain unaffected.

Read the Warranty Policy or contact support@oplacegear.com.